I'm not totally sure what all of this means since I've never had to run a debug before, but it looks as though it stops processing packets properly around line 100698:
**** pak processing end.
packet dropped, first pak not sync
After that, it never recovers and the file copy stops.
Just before that happens, it receives a packet and says that there is no active session between the two machines and the route has apparently been lost. So maybe it is a session timeout as you suggested? If it is, what can I do about it?
192.168.42.68 is on Eth0/8 and 172.20.250.1 is on Eth0/9.
I tried to copy a 3GB file from 172.20.250.1 to 192.168.42.68.
Smaller files, under 10MB, seem to copy just fine.
Thanks.