I have never used Juniper but got one to play with and need some help.
I am testing something and using a SSG5 with 6.3r8 FW and have a /29 from ISP.
I have configured ethernet0/6 with 10.30.3.1/24 and I can get online
I have configured ethernet0/6.1 on vlan 702 with 10.11.7.1/24, this subnet needs to get online as well to register with a external PBX and to get updates to PBX. Currently this vlan isn't getting past FW. From PBX I can ping FW at 10.11.7.1 but nothing past it.
I also need this vlan to use x.y.z.117 for it's external IP white other subnet uses x.y.z.113 for it's address.
How is this done in SSG5? My Cisco ASA works but trying to get SSG5 to do same.
Config: https://pastebin.com/y5z7s4GB
Thansk for the help