I set it up using the details below and the route is getting translated now but no data is being received. You will see that Byte Received is 0. I setup an Untrust to Trust policy but nothing is coming through. Not sure what I am missing, do I need anything in Destination routing?
Source Routing
Network Source Routing Table List Page
trust-vr
Source Routing | | | IP/Netmask | Gateway | Interface | Protocol | Preference | Metric | Vsys | Configure |
|---|
| * | 192.168.0.45/32 | | ethernet4 | S | 20 | 1 | Root |
|
Source Interface Based Routing
Network Interface Routing Table List Page
| ethernet4(trust-vr) | | | IP/Netmask | Gateway | Interface | Protocol | Preference | Metric | Configure |
|---|
| * | 212.24.24.45/32 | | ethernet1 | S | 20 |
|
Policy Results
| Date/Time | Source Address/Port | Destination Address/Port | Translated Source Address/Port | Translated Destination Address/Port | Service | Duration | Bytes Sent | Bytes Received | Close Reason |
|---|
| 2018-02-05 14:17:29 | 192.168.0.45:46154 | 8.8.8.8:53 | 212.24.24.45:1194 | 8.8.8.8:53 | DNS | 92 sec. | 602 | 0 | Close - AGE OUT | | 2018-02-05 14:17:19 | 192.168.0.45:46485 | 8.8.8.8:53 | 212.24.24.45:1195 | 8.8.8.8:53 | DNS | 77 sec. | 258 | 0 | Close - AGE OUT |
|