Hi Gokul,
I've run the cmd as your advice and unfotunately no log printed after I've run the last cmd
SSG140-> set ff src-ip 10.10.10.27 dst-ip 10.10.10.7
filter added
SSG140-> set ff src-ip 10.10.10.7 dst-ip 10.10.10.27
filter added
SSG140-> debug flow basic
SSG140-> ping 10.20.5.7
Type escape sequence to abort
Sending 5, 100-byte ICMP Echos to 10.20.5.7, timeout is 1 seconds
.....
Success Rate is 0 percent (0/5)
SSG140-> All debug off
SSG140-> get db st
SSG140->
SSG140->
SSG140->
Is there any steps that I've missed out?
Thanks
Regards.
