Hello,
I have a SSG5 and created VPN connection for the clients, with Shrew Soft client. Followed several tutorials and this one:
https://www.shrew.net/support/Howto_Juniper_SSG
Now I have a vpn working and I can access resources from my client.
However I wanted to tunnel all the traffic from the client. So in the VPN config of the Shrew Soft in the Policy tab I select "Obtain Topology Automatically or Tunnel All".
After that the vpn connection is established, however no recources available (even per ping).
When connected without the tunnel all option, the VPN Trace tool shows the following in the Security Policies tab:
Dir IN - source 192.168.xxx.0/24 - destination 192.168.xxx.50/32 - type IPSEC
Dir OUT - source 192.168.xxx.50/32 - destination 192.168.xxx.0/24 - type IPSEC
but when connected with the "tunnel all" option enabled, the tab reads:
Dir IN - source 0.0.0.0/0 - destination 192.168.xxx.50/32 - type IPSEC
Dir OUT - source 192.168.xxx.50/32 - destination 0.0.0.0/0 - type IPSEC
What am I missing?
Thank you in advance for support!