hello Champion, here i am facing a little problem while converting security policies from screen OS to SRX please if anybody convert the below config or guide me either iam going right way or not ? set policy id 326 from "DMZ1" to "Trust" "NCR IM" "MIP(10.0.28.14)" "ANY" permit log count traffic gbw 1024 mbw 1024 set policy id 326 set src-address "NCR Outbound SSL" set src-address "NCR Predictive UA" set src-address "NCR Predictive WEB" set dst-address "MIP(10.0.28.15)" set dst-address "MIP(10.0.28.16)" exit set security policies from-zone DMZ1 to-zone Trust policy 326 match source-address NCR Outbound SSL set security policies from-zone DMZ1 to-zone Trust policy 326 match source-address NCR Predictive UA set security policies from-zone DMZ1 to-zone Trust policy 326 match source-address NCR Predictive WEB set security policies from-zone DMZ1 to-zone Trust policy 326 destination-address 10.0.28.14 set security policies from-zone DMZ1 to-zone Trust policy 326 destination-address 10.0.28.15 set security policies from-zone DMZ1 to-zone Trust policy 326 destination-address 10.0.28.16 application any then permit Regards, Fahad
↧