Hi Experts,
I have some problems setting up my SSG140 to do as I want it to do. Would appreciate if someone can contribute some knowledge and expertise.
Current setup:
Server_A - Interface1 192.168.240.1/29
-----------------------
SSG140
-----------------------
Multiple VPN clients linked to Server_A
-----------------------
Sub1 10.10.1.0/24 tunnel1
Sub2 10.10.2.0/24 tunnel1
Sub3 10.10.3.0/24 tunnel1
Sub4 10.10.4.0/24 tunnel1
Sub5 10.10.5.0/24 tunnel1
...
SubX 10.x.x.0/24
Objective:
Open transparent network between subnets. I.e. communication between 10.10.1.0/24 and 10.10.4.0/24.
Preferred is a configuration that allows any traffic between same tunnel but if individual configuration is needed then that is also fine.
If anything is unclear please let me know and I'll try to clarify (not an expert on this).
Thanks!