Re: Policy ID's
Thanks for explaning that, can you confirm, would this happen without manual intervention, ie if we never tried to use number 20 is it possible that could be automatically assigned in new rules. Ie. we...
View ArticleRe: Policy ID's
Yes, that might happen. You can create all your new policies on the cli and manually then choose the id number at creation time. set policy id ##
View ArticleEOL ScreenOS firmware download?
Hello. We have a failed Firewall in our HA pair. We are sourcing a replacement, but we need the ScreenOS to match the primary firewall. I need to find a copy of ScreenOS 6.1.0R6. The model firewall...
View ArticleRe: EOL ScreenOS firmware download?
Follow up question.. Is HA possible with mismatched minor revisions? i.e. 6.1 and 6.2?
View ArticleRe: EOL ScreenOS firmware download?
https://download.juniper.net/software/screenos/6.1.0r6/ssg500.6.1.0r6.0.zip It does require you to log in. You can run 6.1 and 6.2 on the devices for a short time period, however, you might have some...
View Articlesrx210 connect to IP camera auto disconnect after 3 mins
i has been set IP camera at my shop.install camera software at office pc,connect to shop IP Camera,however auto disconnect after 3 mins.At my home connect IP camera normal.office firewall is...
View ArticleBetreff: srx210 connect to IP camera auto disconnect after 3 mins
Have you checked the Session Timeouts? show security flow session https://kb.juniper.net/InfoCenter/index?page=content&id=KB21344&actp=search
View ArticleClik here to view.
Betreff: srx210 connect to IP camera auto disconnect after 3 mins
From webmin,time out show below.how to amend time out?
View ArticleBetreff: srx210 connect to IP camera auto disconnect after 3 mins
Yup - looks like your UDP-Session is about to timeout. 1. Configure a custom application for your Camera Traffic (UDP Port 7028 from what i see on your screenshot): applications {...
View ArticleBetreff: srx210 connect to IP camera auto disconnect after 3 mins
By the way this is the wrong Forum - you should Post SRX-Questions under the SRX Section - for future Posts.
View ArticleRe: SC-CPA on SSG5 not function
HI STEVEWas the url filtering license previously installed and lost?. NOis this a new setup that needs the license applied?. YESThe portal Support->find license key and search by seral number:...
View ArticleRe: When upgrading screenOS, I encounter something problem...
1: Product Name: SSG5-ISDN Software Version: 6.3.0r22.0 <-- this means device is already on the latest version. 2 :ssg5-isdn -> save software from tftp 192.168.XX.XX Loadssg5ssg20v132.d to...
View ArticleRe: SC-CPA on SSG5 not function
Based on the serial number 0162112010004886 , it only has Extended mode license, and does not include WF. Was this device recently RMA'd? If so, then the license would need to be transferred....
View ArticleRe: ssg140 vpn throughtput.
That is total device capacity. If you have one tunnel that is doing 60Mbps, then the other 4 would only be able to get up to 40Mbps
View Articlemutiple untrust adsl , from trust to untrust only Translated Source Address...
We have 3 adsl on ssg350M Trust Zone: ethernet0/3 192.168.7.254/24Untrust Zone: ethernet0/1 (1.1.1.254/24 ) & ethernet0/2 (2.2.2.254/24) & ethernet1/0 (3.3.3.254/24)ethernet1/0 has one MIP...
View ArticleMIP VPN
Hello all, maybe it's a too simple question. I've to setup a SSG-5 with two VPN tunnels. I'm completely new to Juniper devices and only have an example config and the documentation. My question is:...
View ArticleRe: MIP VPN
Hello, You can make use of the below link: https://kb.juniper.net/InfoCenter/index?page=content&id=KB8157&actp=search Note:- That link talks about accessing same MIP from Internet and loopback....
View ArticleRe: mutiple untrust adsl , from trust to untrust only Translated Source...
Is your security policy with the MIP object before the general NAT policy?
View ArticleRe: MIP VPN
This tech note shows how to create a VPN between sites with overlapping subnets using the MIP on the tunnel interfaces. https://kb.juniper.net/InfoCenter/index?page=content&id=KB5346
View Article