ScreenOS VSYS session count via SNMP
Hi I'm trying to monitor the number of active sessions through the firewall which is fine using nsResSessAllocate for physical gateways but strugging to find a way to do it on a per-VSYS level?
View ArticleRe: ScreenOS VSYS session count via SNMP
There is not a MIB to pull for the active sessions in a VSYS.
View ArticleRe: SSG 5 - get VIP to look for route in Untrust-vr
Hi I found this in the "Concepts & Examples ScreenOS Reference Guide" bottom part page 1452 in the all parts pdf: "The host to which the security device maps VIP traffic must be reachable from the...
View ArticleRe: SSG 5 - get VIP to look for route in Untrust-vr
That makes sense, as the VIP is a global object. It's been a while since I've done anything with VIPs.
View ArticleRe: nat incoming source with MIP (ScreenOS)
It sounds like you need both the remote network to have NAT for you and the remote side also has an overlap with your server network and needs to NAT as well. If that is the case then the NAT must...
View ArticleClik here to view.
Does not load OS
I have a juniper ssg-550m that has all the led in red minus the power led.At all times the led remains, I do not recognize the console cable. Can somebody help me?
View ArticleRe: Does not load OS
This is a hardware issue (RAM failure). You would need to RMA the device.
View ArticleRe: Does not load OS
This is the cabling pin out for the RJ45 to DB9 cable needed for the console cable. Juniper devices ship with a 9pin adapter with the rj45 on the other end. They are the same pin out as the blue...
View ArticleRe: Does not load OS
This is a hardware failure based on the status lights. The console will not display anything. You can either open a JTAC case for an RMA or replace the RAM.
View ArticleStrange Latency Issue Netscreen 50
Hi, We're having a bit of a strange issue with latency and can't figure out why. We have two Juniper Netscreen 50's running in HA mode at the gateway of our network. Every Wednesday the latency shoots...
View ArticleRe: Strange Latency Issue Netscreen 50
Hi, Can you check the below information: 1: What is the performance related details during other days and on Wednesdays, during the business hours. get perf cpu all det get perf session detail...
View ArticleRe: Strange Latency Issue Netscreen 50
Thanks for the reply. The following are from today where there are no issues, but obvioulsy the last 24 hours readings stretch back to Wednesday. get perf cpu all det:Last 60 seconds:59: 40(47 3) 58:...
View ArticleSite to Site VPN -SSG5 to Sonicwall
Hello all, Having trouble with my VPN between a Sonicwall and a Juniper SSG5. I have the tunnel up but it is got one-way traffic. Followed the steps outlinned on the KB and not having much luck. Here's...
View ArticleRe: Site to Site VPN -SSG5 to Sonicwall
Hi, How are you checking it's one way traffic? and it's one way from whcih side ? Also, can you please check output of the "get sa stat" ? Thanks,Vikas
View ArticleRe: Strange Latency Issue Netscreen 50
There doesn't seem to be any major issue at present. You can user PRTG monitoring tool etc to check port utilization or other usage. Don't use Syslog on the TCP port. Thanks,Vikas
View ArticleRe: Strange Latency Issue Netscreen 50
Below can also be used to check the PPS on the device : set ppsget pps <-- multiple times for the referenceunset pps Thanks,Vikas
View ArticleRe: Site to Site VPN -SSG5 to Sonicwall
I assume this is a route based vpn based on the output. It looks like you are missing the route into the tunnel interface. sydneyrd-ssg5-> get route ip 192.168.2.0 Dest for 192.168.2.0...
View ArticleRe: SSG 5 - get VIP to look for route in Untrust-vr
Hi Vikas Thanks for your reply. That is correct, I have a tunnel between the DMZ zones of my two ssg5's.The host is on the other side of the tunnel. I can ping bothways through the tunnel. the result...
View ArticleScreenOS VSYS session count via SNMP
Hi I'm trying to monitor the number of active sessions through the firewall which is fine using nsResSessAllocate for physical gateways but strugging to find a way to do it on a per-VSYS level?
View ArticleRe: ScreenOS VSYS session count via SNMP
There is not a MIB to pull for the active sessions in a VSYS.
View Article