Hi,
I hope at least Vendor's subnet can be used at your side and not taken by anyone else.
1: if you use 10.10.10.0/24 then vendor PC will initiate traffic to 10. series ip, it will be pushed through the tunnel.
2: once it's decypted at your end then a subnet nat can used to map 10.10.10.0/24 to your actual subnet.
E.g. : host and subnet mip for reference https://kb.juniper.net/InfoCenter/index?page=content&id=KB10923&actp=METADATA
Note: the VPN will be between the customer side subnet and 10 series subnet , proxy I'd etc should be accordingly. And then the mip trigger for the clear text traffic.
Thanks,
Vikas
I hope at least Vendor's subnet can be used at your side and not taken by anyone else.
1: if you use 10.10.10.0/24 then vendor PC will initiate traffic to 10. series ip, it will be pushed through the tunnel.
2: once it's decypted at your end then a subnet nat can used to map 10.10.10.0/24 to your actual subnet.
E.g. : host and subnet mip for reference https://kb.juniper.net/InfoCenter/index?page=content&id=KB10923&actp=METADATA
Note: the VPN will be between the customer side subnet and 10 series subnet , proxy I'd etc should be accordingly. And then the mip trigger for the clear text traffic.
Thanks,
Vikas