Hi Rizwan,
I understand that you want to move the interface from interface "ethernet4/2.826" to ethernet2/2.826 , ZONE , security policy , vrouters etc remains same.
1: First you can ceate another interface on the Eth4/2 with the same tag as you have on the Eth4/2 . You don’t need to delete exiting one.;
e.g: set interface ethernet2/2.826 tag 826 zone "ABC”
2: Now you need to delete the IP from the exiting one and need to add the same IP on the newly created sub-interface. This should disrupt the services for few minutes, if everything works as expected . You can also connect ethernet2/2.826 first to make sure physical link is coming up or not, and configure the interrace management services ( Ping , SSH telnet etc) accordingly.
Thanks and Regards
Vikas Singh
I understand that you want to move the interface from interface "ethernet4/2.826" to ethernet2/2.826 , ZONE , security policy , vrouters etc remains same.
1: First you can ceate another interface on the Eth4/2 with the same tag as you have on the Eth4/2 . You don’t need to delete exiting one.;
e.g: set interface ethernet2/2.826 tag 826 zone "ABC”
2: Now you need to delete the IP from the exiting one and need to add the same IP on the newly created sub-interface. This should disrupt the services for few minutes, if everything works as expected . You can also connect ethernet2/2.826 first to make sure physical link is coming up or not, and configure the interrace management services ( Ping , SSH telnet etc) accordingly.
Thanks and Regards
Vikas Singh