Re: Pass multiple subnets through the SSG-20?
Thanks for the update. Since this was right on a nice subnet boundry had a feeling it would be routing in one direction or the other. Glad you are up and running.
View ArticleI want to change the Interface of a zone from 1G to 10G port
Dear All, I have a ISG-2000 in production, and need to move a tagged interface for zone ABC tagged under interface "ethernet4/2.826" to a 10G port. How can I do this with minimum service affect?The...
View ArticleRe: I want to change the Interface of a zone from 1G to 10G port
Hi Rizwan,I understand that you want to move the interface from interface "ethernet4/2.826" to ethernet2/2.826 , ZONE , security policy , vrouters etc remains same.1: First you can ceate another...
View ArticleRe: I want to change the Interface of a zone from 1G to 10G port
Dear Vikas, Thank you so much for your reply, I beleive this will work fine as explained... My only concern is, will the system accept same VLAN 826 on two different interfaces? If so then as...
View ArticleRe: I want to change the Interface of a zone from 1G to 10G port
Yes, system should allow to have two subinterfces with the same VLAN. Same can be configured in my LAB , see below :set interface "ethernet0/1.1" tag 5 zone "DMZ"set interface ethernet0/1.1 ip...
View ArticleRe: I want to change the Interface of a zone from 1G to 10G port
Dear Vikas, Thank you so much for your support, it is very clear now... Best regards, Rizwan.
View ArticleRe: Unable to come out of Firmware boot loader in ISG 1000 and unable to...
Hi pradeep, Will you please share me the old boot loader file we are also facing the same problem. It will be very helpful for me please share ASAP. My mail id : shaikashu7262@gmail.com
View ArticleRe: VPN client receives incorrect subnet mask
Hi, would like to refresh the thread.Need help on that as again I receive the 255.255.255.255 subnet mask...Thanks in advance!
View ArticleRe: VPN client receives incorrect subnet mask
Unfortunatelly it does not that way that the communication is routed when connected, I have no connection to local machines when connected via VPN. I quess that the problem is the subnet mask then.
View ArticleRe: VPN client receives incorrect subnet mask
Here is the portion of my data.My local network is 192.168.101.0/24. Within I have some fast ip addresses and a dhcp with the range of 192.168.101.100 to 192.168.101.110.Within the vpn I set a pool of...
View ArticleRe: VPN client receives incorrect subnet mask
think I know why it is happening.In the Policy-Policy elements-Addresses-List all the dial-up VPN entries are with the 255.255.255.255/32 ip/domain name.Where can I edit it?Or should I create new? In...
View ArticleSSG5 Site to Site VPN Won't come up Inactive/Inactive
New member to the forum have an issue with new vpn tunnel new install do not know what my issue is. s the config flawed or is the isp blocking my vpn? Thanks Michael cfg files as followscfg1unset key...
View ArticleRe: SSG5 Site to Site VPN Won't come up Inactive/Inactive
Hi, I understand that you are referring to "VPN for 192.168.1.0/24" . There is no proxy-id config or I don't see you are calling it in any policy . Please configure the proxy-id, policy , route etc...
View ArticleRe: SSG5 Site to Site VPN Won't come up Inactive/Inactive
It looks like you are trying to setup a policy vpn with this policy set policy id 3 from "Untrust" to "Trust" "192.168.1.0/24" "192.168.0.0/24" "ANY" permit set policy id 3exitset policy id 2 from...
View ArticleClik here to view.
Re: SSG5 Site to Site VPN Won't come up Inactive/Inactive
Hey Michael - Let me be the first to say ... WELCOME to the J-Net Community! ... and thanks for diving right into the HEART of our COMMUNITY .... the discussion forums. Let us know if or 's...
View ArticleRe: SSG5 Site to Site VPN Won't come up Inactive/Inactive
I have no idea why, but after a day and a half the tunnel started working and has been up all day. I am hoping that it will remain working as I lean more about the config file and the changes I need...
View ArticleISG2000 6.3.0r16b.0 firmware update to 6.3.0r26
Hi all, I have a Juniper ISG2000 (No IDP) with the version 6.3.0r16b.0, I would like to upgrade the firewall firmware to : 6.3.0r26. What are the changes in the new version? What are the open points?...
View ArticleRe: ISG2000 6.3.0r16b.0 firmware update to 6.3.0r26
Reviewing release noted will give you a good idea about enhancements, fixes etc., https://www.juniper.net/documentation/product/en_US/screenos
View Articleunable to access DVR through ssg5
We are trying to port a dvr through the system to access the cameras and cannot see them here is a copy og the config, hope you can show me where is issue is. the cameras are on port 3777 tcp 3778...
View ArticleSSG5 keeps dropping connection to Shaw modem
Little history have a lihts and water system connected to the juniper which is remotely controlled from another location. The issue is that the connection between the shaw modem and the juniper loses...
View Article