Yes, I try the image that was working.
The link that you attached is for NS, I don't know if it works with SSG or not.
During the boot process , the following messages appear:
Juniper Networks SSG-140 Boot Loader Version 3.2.4 (Checksum: 9D76F0F2)
Copyright (c) 1997-2006 Juniper Networks, Inc.
Total physical memory: 512MB
Test - Pass
Initialization - Done
Hit any key to run loader
Hit any key to run loader
Hit any key to run loader
Hit any key to run loader
Loading system image "$BABOOT$.BIN" from on-board flash disk...
Done! (size = 12,058,624 bytes)
cksum = a3c25bfb, p_hdr->cksum = c5ade254
### image corrupted ###
Loading default system image from on-board flash disk...
Done! (size = 12,058,624 bytes)
cksum = 57a1de05, p_hdr->cksum = c5ade254
### image corrupted ###
Serial Number [0185102012000389]: READ ONLY
HW Version Number [1010]: READ ONLY
Self MAC Address [40b4-f08c-5f00]: READ ONLY
Boot File Name [imagekey.cer]:
The router ask for file to upload, there is nothing I can do.. any command is not working.
Attached is file that you requested.
Thanks