VIP IP Public to ip private remote server cant contacted JUNIPER SSG5
Hi guys,i have ip public 103.244.205.25and then i have ip local : 10.173.1.0/24and this ip remote : 192.168.2.30 between local and remote ip each can ping via ipsec connection. but when i configuring...
View ArticleRe: VIP IP Public to ip private remote server cant contacted
Hi,Can you share your VIP configuration, also are you using “server auto detection” ?Thanks and RegardsVikas Singh
View ArticleClik here to view.
Re: VIP IP Public to ip private remote server cant contacted
wrote:Hi,Can you share your VIP configuration, also are you using “server auto detection” ?Thanks and RegardsVikas SinghHi vikas,yes i use server auto detectionVIP configuration :VIP Configurationping...
View ArticleRe: VIP IP Public to ip private remote server cant contacted
This looks to be due to the service auto detection, which is failing:Message : VIP server 〈server_IP〉 cannot be contacted.Meaning: The specified Virtual IP (VIP) server is not respondingto the...
View ArticleRe: VIP IP Public to ip private remote server cant contacted
I've never had server auto detect work on anything other than http or https so it is best to just turn off that feature in this case.
View ArticleNSRP Cluster License for SSG-5 home user
Hi! SSG5 ist EOL and ideal for some playing at home with them, you can get them on ebay for 20$ already.Does anybody know how to get a NSRP Cluster license for free? regards Glo
View ArticleRe: NSRP Cluster License for SSG-5 home user
Licenses like the ssg-5-elu are only sold new or tied to a specific hardware serial number.So you would need to purchase a used unit with the license already enabled or get a new unactivated license...
View ArticleRe: NSRP Cluster License for SSG-5 home user
Not only that, it also needs an unlimited user license.
View ArticleCritical error of Scan Manager
Firmware is 6.3.0r13.0.Just received an email alert[00001] 2019-06-25 21:52:43 [Root]system-critical-00554: SCAN-MGR: Check AV pattern file failed with error code: test load db fail on worker load db...
View ArticleRe: Critical error of Scan Manager
Hi,[00001] 2019-06-25 21:52:43 [Root]system-critical-00554: SCAN-MGR: Check AV pattern file failed with error code: test load db fail on worker load db failure.When the AV database is updated, a...
View ArticleRe: Critical error of Scan Manager
The existing DB and the one downloaded will be different. The issue may have occurred either while comparing the DB’s or while loading the files. When the AV database is updated, a temporary directory...
View ArticleRe: Critical error of Scan Manager
Normally we recieved this kind of issue due to AV upadtion of database.you can cheke below link for...
View ArticleRe: Critical error of Scan Manager
Hello pradkm,The message "SCAN-MGR: New AV pattern file has been updated. Version: 06/26/2019 21:29 GMT, virus records: 60474; size: 7978471 bytes." shows in Event. Confirm AV update resume.Should be...
View ArticleRe: Critical error of Scan Manager
Hello abhisg,The error message shows only once. AV update resume now. Thanks.
View ArticleRe: Critical error of Scan Manager
Hi, Yes, that message confirms the update being done successfully. In case, such updates, please follow the steps mentioned in the KB to update it manually. If it still fails, reach out to JTAC. Glad...
View Articlenetscreen domain name for an ip addr
Hi All,Could you please let me know is there any option in SSG to configure domain name-ip address mapping, so that i can ping some mapped servers using the domain name ? I have seen an option to call...
View Articlel2tp site to site between two SSG
Hello, I am trying to make a l2tp tunnel between two Juniper SSG 320M, using one SSG like server and the other like client but I cannot do that the tunnel works, Do you have any suggestion or guide of...
View ArticleRe: l2tp site to site between two SSG
all of the kb for l2tp that I see assume you are using this as a remote access method from a client computer. Seems possible it is not tested for site to site use.
View ArticleRe: netscreen domain name for an ip addr
In the web interface Network > DNS > CacheCreate a static entry with the name and ip address you want
View Article