Re: netscreen domain name for an ip addr
Thank you so much, i will check and update you.
View ArticleSSG with DLNA between VPN
Hello, We are installing Juniper SSG 320M in different sites, and configuring VPN GRE between them, also We are trying to send multimedia data, through the tunnel of the VPN, with DLNA without...
View ArticleClik here to view.
Re: SSG with DLNA between VPN
Please check if these will help. https://kb.juniper.net/InfoCenter/index?page=content&id=KB3256https://kb.juniper.net/InfoCenter/index?page=content&id=KB19954 Also, some important notes...
View ArticleThere is no bridge group interface on ISG 2000
We have an ISG 2000 firewall running 6.3.0r13b.0 that does not have a bgroup interface configure by default, nor have I been able to create one. We need this for a VPN connection, but I've spent a lot...
View ArticleRe: There is no bridge group interface on ISG 2000
Hi, Bridge interface is supported on the SSG Series of ScreenOS. Bridge Groups are new to ScreenOS starting with version 6.0. on the SSG firewall family. These represent a logical Layer 2 switch within...
View ArticleRe: There is no bridge group interface on ISG 2000
If you can add more on the requirement for this bgroup interface for VPN, we can help find the alternatives on ISG, Regards,Pradeep.
View ArticleRe: There is no bridge group interface on ISG 2000
Thanks for the responses. We're configuring a route-based VPN to Azure, and the configuration appears to utilize bridge groups.
View ArticleRe: There is no bridge group interface on ISG 2000
can you post a link or the provided sample configuration and we can help convert it to something compatible with the ISG.
View ArticleRe: There is no bridge group interface on ISG 2000
Hi, As per my knowledge, a bridge group is not a compulsory requirement for a route based VPN with Azure. Bridge group interface to the external world is just another interface with an IP configured....
View ArticleRe: SSG with DLNA between VPN
Hello, We can set the tunnel gre and We can pass traffic through the tunnel GRE, the only problem is that We cannot transmit multimedia data with dlna through the tunnel, so the clients at one end of...
View ArticleProblems bringing up policy-based VPN tunnel on ISG 2000
Our ISG 2000 is running 6.3. We were trying to get a route-based VPN set up to Azure, but we couldn't get that resolved, so now we're trying a policy-based VPN. It sure looks simple enough, but we...
View ArticleHow to remove entry from BGP advertisment
Hello, We have BGP VPN to teo remote systems with IPs 172.188.32.45 and 172.188.33.45 . We are using same VR for both VPNs. How we could stop local network 192.168.6.0/24 to be advirtised via BGP to...
View ArticleRe: How to remove entry from BGP advertisment
Hi Beko, Please refer to KB https://kb.juniper.net/InfoCenter/index?page=content&id=KB23528 . This explains with an example configuration. Thanks,PradeepPlease Mark My Solution Accepted if it...
View ArticleScreenOS - How can I read the "get session" output correctly?
Hi guys, Following a flow captured from an old NetScreen in my company (for security reasons, I changed the IP addresses):id 1916387/s1*,vsys 1,flag 00200440/4000/0003/0000,policy 2549,time 1, dip 0...
View ArticleVPN tunnels usage - SSG140
Hi,I´d like to know how to check the VPN usage for the SSG140.The get license shows 500 VPN Tunnels:SSG140A(M)-> get license-key Model: Advanced Sessions: 48064 sessions Capacity: unlimited number...
View ArticleRe: ScreenOS - How can I read the "get session" output correctly?
Many my dubts have been solved by this documentation:https://kb.juniper.net/InfoCenter/index?page=content&id=KB24728&cat=NS_5400&actp=LIST Nevertheless I don't still understand what are the...
View ArticleRe: ScreenOS - How can I read the "get session" output correctly?
Yes, the if number in the session output should match the interface number in get system. You can see if session is "working" by checking that there are packet counts in both directions. Typically the...
View ArticleRe: VPN tunnels usage - SSG140
correct the tunnel count is based on the active security associations on the device and the licensed limits.
View ArticleRe: ScreenOS - How can I read the "get session" output correctly?
Ciao Spuluka! ---------------------Yes, the if number in the session output should match the interface number in get system.---------------------in "get sys" output I can't see the interface number,...
View Article