Re: SSG5 ScreenOS update failed (unit continuously reboots)
Sounds like a known issue. Download the following version of firmware, interrupt the boot process, load the image via TFTP, let it boot, then upgrade to 6.3r23....
View ArticleRe: can't fetch reports for netscreen firewall
Hi Swati, You can download the 6.3 MIB file from the below mentioned link : # https://www.juniper.net/techpubs/software/screenos/mibs.html You will find the tempreature in NS-Chassis MIB file and...
View ArticleRe: can't fetch reports for netscreen firewall
how to see the value for OID ?I have seen the file but I don't find the OID for session and temperature with which server should poll to fetch the data.also confirm by which command we see that mib...
View ArticleRe: can't fetch reports for netscreen firewall
Hi Swati, You can load the MIB file in any MIB browser for eg. Ireasoning. Once you do this you just need to click on SNMP MIB , the OID will be shown on the OID bar at the top of the browser. I have...
View ArticleRe: SSG5 ScreenOS update failed (unit continuously reboots)
Hi SPULUKA, thanks for your advice. Juniper won't renew support for this device since it's too old (EOL). Yes, I get to the loader prompt and I can upload versions using TFTP. That's how I uploaded and...
View ArticleRe: SSG5 ScreenOS update failed (unit continuously reboots)
These devices are still supported until 2020. You should be able to download the file from the link I provided above as long as you have an account on the Juniper site.
View ArticleRe: SSG5 ScreenOS update failed (unit continuously reboots)
Hi RSEIBERT. Thank you for your post. That fixed it!!!! The link you provided worked. I was able to download the "error fix" version of ScreenOS and flash it into my unit. It booted up without the...
View ArticleRe: SSG5 ScreenOS update failed (unit continuously reboots)
Not a problem. Please mark this as solved, and kudos are apprieciated.
View ArticleRe: can't fetch reports for netscreen firewall
i only have CLI access to nerscreen firewall.I would like to know if the MIB file is present in the firewall or not . Is there any command to check the same.Also I need the OID for session and...
View ArticleClik here to view.
Re: can't fetch reports for netscreen firewall
Hi Swati, MIB file does not reside on FW. The SNMP server will have the MIB file. You need to enable SNMPv2 or SNMPv3 on the FW and perform SNMP walk from the server to fetch the requrired information....
View ArticleNSM ISG2000 IDP signature Update issue
Hi every one.recently i have a strange problem in updating my isg 2000 IDP signatures with NSM. last week i updated my idp modules with latest signatures via offline method which is downloading two...
View ArticleRe: NSM ISG2000 IDP signature Update issue
Hi Sevan, I thnk you are using very old version of NSM:2010.3. As per TSB17019 signature update is EOL for below products version. PRODUCT AFFECTED:High End SRX Versions 9.2 through 12.1R2Branch SRX...
View ArticleRe: NSM ISG2000 IDP signature Update issue
Hi Rishi , thanks for your reply. you are right about my NSM version but the fact is despite of my old NSM version i was able to update my IDP till last week just before change of the...
View ArticleRe: NSM ISG2000 IDP signature Update issue
Hi Sevan, I do understand that but there are some changes which have been made as per the EOL which might be causing this issue. I would recommend you to upgrade the version and than let me know if the...
View ArticleRe: can't fetch reports for netscreen firewall
Juniper has a MIB explorer application on the support site. https://contentapps.juniper.net/mib-explorer/ Using this you can either search for terms in the MIB to find the OID of interest or just...
View ArticleRe: NSM ISG2000 IDP signature Update issue
Thanks Rishi accourding to your guidance and documentations im convinced to upgared my nsm and i think its right thing to do. but i have questions for this upgrade thing. 1- my nsm is 2010.3 and if i...
View ArticleRe: NSM ISG2000 IDP signature Update issue
Hi Seven, Generally if the number of devices managed by NSM are less than 25 then it is base license used on that server. When you need to manage more than 25 device you need to purchase additional...
View ArticleRe: NSM ISG2000 IDP signature Update issue
Hi Rishi i want to say thank you for all your effort in helping me through this. you helped me so much. for final question as i red the documents i assume these things are correct. can you verify: 1-...
View ArticleRe: NSM ISG2000 IDP signature Update issue
Hi Sevan , I request you to please refer the Page-16 for the recommended upgrade paths to 2012.2 following the below mentione link : #...
View ArticleProblem with VPN configuration: The peer sent a TS that did not match the one...
Hi, I have followed this document to establish VPN connection between Juniper SSG140 and iOS...
View Article