Re: QoS configuration based on destination ip in ssg 5
Dear Steve Thank you so much for your prompt help.It is really helpful to me. Best RegardsSoe
View ArticleRe: NSM ISG2000 IDP signature Update issue
Thanks Rishi for your effort and helpful guidance.
View ArticleClik here to view.
Re: MIP VPN
Sorry, I don't get it to work. Please let's explain my situation: - SSG5 directly connected to the internet on ethernet0/0- Two VPN-Tunnels, one with 172.16.x.66/30, second with 172.16.x.70/30-...
View ArticleRe: MIP VPN
I think I follow you now. You need to put the MIP on the tunnel interface not the bgroup interface.
View ArticleClik here to view.
Re: MIP VPN
Oh, that makes sense But both tunnels are terminating on the same site (one is primary, the other is fallback). I think I've to create some kind of grouping like in the exmaple from rtilak and put the...
View ArticleRe: MIP VPN
Sorry, I missed the part where there were two VPN tunnel interfaces. Yes, you will create the loopback and put the MIP on the loopback. And create the tunnel interfaces added to the loopback group....
View ArticleClik here to view.
NAT-ing Issue - URGENT
Dears, i would appreciate your help in the below case as i couldnt find a solution yet. Trust - 192.168.1.1Untrust - x.x.x.34 - x.x.x.35 i want to do NAT for the private IP address with the...
View ArticleRe: NAT-ing Issue - URGENT
I'm not sure I understand all the requirements here. But I'm pretty sure you do not want MIP as the method. You want outbound traffic from 192.168.1.1 to source nat to x.x.x.34 You want inbound...
View ArticleRe: NAT-ing Issue - URGENT
thanks dear for your reply, let me give you more details which will give you a better image, i'm trying to configure VOIP trunks with a VOIP-SP, the setup is like...
View ArticleRe: NAT-ing Issue - URGENT
Right, you CANNOT use two MIP to the same address. So to help with your configuration we need to know why there are two public addresses going to the same server ip addresses. There has to be some...
View ArticleRe: NAT-ing Issue - URGENT
yes Dear, the point is that there was an old setup with the VOIP-SP as below: 192.168.1.1 MIP(x.x.x.34) with SIP ports allowed. (to initiate a call)10.10.10.1 MIP(x.x.x.35) with RTP UDP ports allowed....
View ArticleRe: NAT-ing Issue - URGENT
For the outbound traffic, you will create a dip for the desired address and a matching policy with the desired source and port addresses for the source nat. See page 38 pdf printed page...
View ArticleClik here to view.
cannot download config file from GUI after upgrade
Hi Experts, after we upgrade our SSG350 to it's recommended firmware version 6.3.0r23, we cannot download the current config file from its GUI. the other one which is SSG20 that we upgrade with the...
View ArticleRe: cannot download config file from GUI after upgrade
Strange, no such known issues. Hvae you tried with different browsers ? there should be _cfg.txt file in the download location. Thanks,Vikas
View ArticleRe: cannot download config file from GUI after upgrade
I don't have a ssg320 but have not had issues pulling the config files on other models either. I would also try using different browsers and OS as a start. As a backup you can pull the file from the...
View ArticleRe: NetScreen 5400 problem
Any other solution? I would like to solve the problem myself. Thank you for your answers.
View ArticleClik here to view.
SSG5 Bandwith problems
Hello all I'am working with SSG5 6.3.0R14B and since I've switched from 10 Mbps to 40 Mbps with my ISP I've noticed that I have still 15 Mbsp download on a speed test not 40 like I should have. Is it...
View Article